The plan has very simple and clear moving path. Offices both directors and jointed are placed on opposite side of plan because of window placement in order to get natural light in to the spaces. The directors and jointed offices are connected via Sample Area placed around the entrance, and between them are placed Dark Room (near Open Space Office) and Meeting Room (near Directors Office). This kind of disposition of the rooms is very practical and suitable for both employees and clients. Sample Area is placed in order to make first connection and impression towards potential clients. Also Meeting room and Directors Office are easily approachable from the Sample Area which is very suitable for meetings with clients. They can go directly to that rooms without crossing around other rooms instead. In Sample Area there is room for 21 sample boards, with notice that 14 boards (on the side where the Entrance door are placed on plan) are placed in two rows (one above another) and could be easily pulled down using a simple rail system (shown in renders). I didn't want to clutter the space by putting a lot of furniture, but there is enough space for you to set some shelving and storage units if you decide you need more space for that purpose. I putted some statement pieces of furniture that are affordable. Floor finish is polished concrete in dark gray color, and wall finish is made with concrete plaster in lighter gray color to compliment the idea of industrial ambiance. For that reasons I chose lighting pendants with copper finishing to emphasize that industrial feeling.